The Remington is one of the most widely used bolt action rifles on the market and is regularly taken out hunting a wide variety of game. It is most commonly found in the popular .30-06 cartridge and is notable for being a modern version of the classic Mauser 98 style action.
The use of a bipod is a popular accessory to be added to the Remington 700. The bipod makes it possible to settle down and take a more carefully considered shot that is properly balanced and aimed whether from the prone or sitting position. When you add one to a bolt action firearm you are giving yourself another small edge in the quest for greater accuracy.
The list below are the bipods that are most frequently recommended when people ask which bipod would be best for use with a Remington 700. The bipods in this list cover a range of prices but the consensus, when it comes to the higher priced models, is that they are worth every cent.
Comparison of Bipod Recommendations for the Remington 700
Make / Model
6 - 9"
4.75 - 9"
4.75 - 9"
7 - 9.25"
6 - 9"
6.1 - 7.9"
Descriptions of Bipods
Now that we have been able to browse through the highly regarded bipods for use with a Remington 700 we will take a look at a more detailed overview of each. Each of these brief Remington 700 bipod reviews aims to provide you with extra information about the bipod that is not otherwise immediately apparent in the summary list such as special unique features. It should also help you in working out which would prove to offer you the greatest value in terms of its usefulness.
Harris Engineering 1A2-BRM Solid Base Bipod
The Harris 1A2-BRM Solid Base Bipod is an extremely solid bipod that provides a firm base from which to shoot. There are four height settings that the bipod can be set at from 6 to 9 inches with the notches positioned at 1 inch increments.
The point of the solid base bipod is that it is designed for shooting from a flat surface and this particular bipod gives you a very secure platform.
The bipod attaches to a swivel stud and the design has been made so that the bipod is settled snugly against the stock. If you are using Picatinny rails then the Harris Bipod Rail Adaptor will provide you with the perfect rail mount system.
The spring loaded legs deploy quickly and effectively and then it’s a simple matter of making the adjustments to the legs to account for slightly uneven terrain.
Atlas BT10 LW17 w/ADM 170-S Lever Bipod
The Atlas bipods are acknowledged as offering the shooter a large range of features in bipods that are made to the highest standard. Because they can provide the shooter with a particularly adaptable platform from which to shoot the potency of the Remington 700 is enhanced.
The bipod is constructed from T6061 aluminum and has a hard anodized finish to give it a tough exterior. The solid and dependable springs and fasteners are made from stainless steel. From these hard and tough components you move to the softness and durability of the rubber feet that will be suitable for many different types of surfaces.
Plenty of flexibility is built in with 15 degrees of both pan and cant movement that can be tightened by turning a knurled knob.
The legs can be positioned in one of four settings, straight back, straight down, at 45 degrees forward and straight forward. All of the various leg positions are solid and allow the shooter to load the bipod at 45 or 90 degree positions. The legs can also be extended to a number of heights ranging between 4.75 inches and 9 inches. There is also the option of adding 3” leg extensions to increase the height.
This Atlas bipod uses a quick detach mounting system that will mount directly to a Picatinny rail using the provided ADM-170 S-Lever. There is an alternative model in which you can use a standard machine screw fastener based clamp.
There is little doubt that the goal of the Atlas bipod is to provide the shooter with a solution to any need as they go about setting up and preparing for an accurate shooting session.
Atlas BT10 V8 Bipod
Another entry from the Atlas range of bipods offers the same high quality and reliability made in a lighter version to make carry even easier.
The bipod mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly. It is comprised of 6061-T6 aluminum that is Mil-Spec Type III hard coat anodized and have heat treated stainless steel components.
The legs can be moved independently from each other and can be oriented in any of 5 positions by either hand. The leg positions allow the shooter to load the legs at the 45 and 90 degree positions. The outer leg slides on the Inner leg locating on any of five positions ¾” apart.
The standard feet for this bipod are soft durable rubber which are suitable for a range of surfaces. There is also the option of swapping them out for Ski, Spike, Cleat and Spiked Cleat feet and this can be done quickly when out in the field.
GG&G Standard XDS Bipod
This is a rock solidly dependable bipod that offers a strong pivot mechanism. It is able to cant 25 degrees in either side of center to help cater for shooting on rough or uneven terrain. The swivel tension adjustment can be made without the need for tools.
The bipod will attach to any MIL-STD-1913 or Weaver dovetail rail without the need for an adaptor. It can adjust in height from 7 inches to 9.25 inches and the legs are can be deployed silently and then tightened into place using thumb nuts. It features tool-less cant tension adjustment and the foot pads are designed to grip tight.
This is a very high quality bipod that has been made from a combination of aluminum and steel with the steel components made from 4130 steel. It has been engineered to meet military requirements and will continue to perform strongly in extreme weather conditions.
The finishes are matte black as per Mil-Spec which not only makes them hard to detect but also makes them look very impressive.
Caldwell XLA Pivot Model Bipod
The Caldwell XLA Bipod provides a solid shooting platform that will attach to any firearm with a sling swivel stud. It is constructed from aluminum which not only ensures it will withstand repeated shots but has also been used to minimize the weight of the unit.
The other aspect of this particular bipod is the pivoting feature. This is an important inclusion because it allows the shooter to compensate for uneven ground with the lower portion of the bipod pivoting independently from the upper stock mount. This enables the firearm to be leveled when it is placed on uneven ground and it can do so at slopes of up to 20 degrees. The pivot can be controlled by a tension knob.
This model is the lower profile with the legs being spring loaded to deploy at the touch of a button. They are notched so that can be set to specific heights. The legs can be collapsed forward for easy carry when not in use and they end with soft rubber feet for added stability.
UTG Tactical OP Bipod
This is a remarkably versatile bipod that is available with a center height that ranges from 6.1” - 7.9” with leg adjustment that ranges from 5.5” - 7.4”. It features full metal construction of high tech durable aluminum and a steel top platform. You get the option of attaching it to your firearm in one of two ways - Picatinny Rail or Swivel Stud Mount.
The legs are extremely adjustable with 7 notches that gives you a great deal of flexibility over all types of uneven terrain. The foldable arms can be retracted quickly and easily at the push of the button with external spring retraction controls.
This is one of the more popular bipods on the market and can be readily found for under $35.00.
Although the more common use of the Remington 700 is for deer or elk hunting there is a case for its use with a bipod. Shooting from a stand or a blind is a scenario where a properly supported rifle will be greatly desired in that type of environment. It may also be a preference to settle down and sit in place as you wait to take your shot or even take the prone position for a chance at a long range shot.
The bottom line is that a bipod will help in increasing your accuracy and can even make important shots easier. It is definitely worth considering that the way to get the best performance from your rifle may be through the use of a quality bipod.