Martin continues to forge forward with new technologies and innovations designed to help the bow hunter take a smooth and silent shot.

The new range of bows is headlined by the DSX Series bows powered by the new DSX Cam System.

The entire range of hunting compound bows that comprise the 2021 line-up is below complete with a full description of each bow’s features and specifications.

Find further details about all of the products in the Martin range by visiting the Martin Archery website.

2021 Martin Archery Compound Bows

Martin DSX Series 31

The new DSX series compound bows feature a new cam system designed to give you the smoothest, most comfortable possible shooting platform available.

The 31 indicates the length of the bow which actually measures 30.385” from axle to axle.

The new DSX Cam System that has two tracks with a control and a buss cable with one moving in while the other moves out powers the bow. This makes for a really smooth shooting platform.

The bow shoots dead in the hand with no noise and no hand shock. Part of this comes from the inclusion of a high efficiency roller guard that is perfectly adjustable.

The lack of hand shock can also be attributed to the design of the riser which has been thickened up at the neck. The riser also contains a couple of small reverse bridges which add significant strength.

Also featured in the riser is the RRAD Weight Distribution System which adjusts depending on the preferences of the archer.

The DSX 31 boasts a brace height of only 6”.  The IBO rating on the bow is 335 fps.

The draw weight adjusts between 3 different ranges, 45-55 lbs, 55-65 lbs and 65-75 lbs.

There are a good selection of riser finishes available for the bow including Black, Hard Coat Grey, Hard Coat Green, Realtree Edge, Realtree Escape, Realtree Grey Edge, American Flag Grey and Realtree Polar.

The bow has an MSRP of $899.00.

DSX Series 31 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

27 - 30"

45-75 lbs

30.385"

4.0 lbs

6"

85%

335 fps

Martin DSX Series 33

The DSX 33 is the longer framed version of the DSX platform to provide bow hunters with an option that suits the larger framed person.

The bow has an axle to axle length of 33 inches and the draw length ranges from 28 to 31 inches.

All of the features that are found on the DSX 31 are also built into the 33 making it just as smooth and hand shock free as the more compact version.

The bow is slightly heavier at 4.3 lbs and it also has a higher IBO rating at 335 fps.

There are a good selection of riser finishes available for the bow including Black, Hard Coat Grey, Hard Coat Green, Realtree Edge, Realtree Escape, Realtree Grey Edge, American Flag Grey and Realtree Polar.

The MSRP for the DSX 33 is $899.00.

DSX Series 33 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

28 - 31"

45-75 lbs

33"

4.3 lbs

6"

85%

335 fps

Martin ADX 6

The ADX 6 is billed as a versatile long draw hunting machine and it is packed into a compact frame that is both quiet and fast. It caters to hunters looking for a draw length from 26 to 30.5 inches in length.

It uses the HYBRIX Cam System with Helix Groove in the lower cam along with the new Mass Distribution system which enables the archer to choose where to place the weight when arrow tuning.

Other technologies such as the Tri Loc System and the RRAD Weight Distribution System are used in the ADX.

The bow is available in the following finish and color options: Black, Hard Coat Grey, Hard Coat Green, Realtree Edge, Realtree Escape, Realtree Grey Edge, American Flag Grey, TAC Tan, TTHA and Realtree Polar.

The MSRP for this bow is $1097.00.

ADX 6 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

26 - 30.5"

55-75 lbs

32"

4.55 lbs

6"

85%

348 fps

Martin ADX 7

The ADX 7 is a far more compact hunting bow measuring only 28” from axle to axle.

This bow is the perfect choice for tree stand and blind hunters or for close and overgrown terrain.

The bow uses all of the features found on the ADX 6 such as the HYBRIX Cam System with Mass Distribution System and the RRAD Weight Distribution System.

The bow is a little more forgiving than the ADX 6 due to the longer brace height of 7” and it has an IBO of 338 fps.

It is available in the following finish and color options: Black, Hard Coat Grey, Hard Coat Green, Realtree Edge, Realtree Escape, Realtree Grey Edge, American Flag Grey, TAC Tan, TTHA and Realtree Polar.

The MSRP for this bow is $1097.00.

ADX 7 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

26 - 30.5"

55-70 lbs

28"

4.29 lbs

7"

85%

338 fps

Martin Axxon 7

The Axxon compound bow range is the company’s target bow range and the Axxon 7 measures up with an axle to axle length of 37 inches.

Just as with the other bows already discussed above, the bow uses the Tri Loc System to maximize the bow’s performance. It also uses the RRAD System that enables weight distribution along the riser for greater balance and performance.

Also included in the Axxon is Balanced Bow Technology to enable better grip position and superior weight distribution as well as Dual Synch Technology for a smooth draw.

The bow is powered by the Helix Cam and also uses the Helix Groove so that cam lean is eliminated and there is no wear on the cables.

The limb options range from 35 to 50 lbs and they are adjustable in 5 lb increments. Draw length options are the long draw ranging from 28.5” to 31.5” and short draw ranging from 25.5” to 28.5” with half inch adjustments.

The bow is available in the right hand option only.

The bow is available in the following finish and color options: Hard Coat Black, Hard Coat Red, Hard Coat White, Sharkskin Green, Sharkskin Grey, Sharkskin Blue, American Flag Grey plus a range of custom colors.

The MSRP for this bow is $1097.00.

Axxon 7 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

25.5 - 31.5"

50-70 lbs

37"

6.0 lbs

7.375"

Up to 90%

333 fps

Martin Rev

The Rev is an entry level compound bow and is a shorter framed hunting bow designed to be more forgiving and smoother in the hand. It measures 31” from axle to axle and has a brace height of 7.5”.

The bow is powered by the REV Cams and offers a draw length that ranges from 20 to 30 inches and the adjustment can be made very easily without the need of a bow press.

This is a lightweight bow at only 3.6 lbs and has proven to be dead in the hand at the shot with little or no vibration for an extremely quiet bow.

The bow is available in the following finish and color options: Black and Realtree Edge.

The MSRP for this bow is $449.00.

Rev Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

23 - 30"

Up to 70 lbs

31"

3.6 lbs

7.5"

75%

320 fps

Martin Maxx 33

The Maxx 33 compound bow is a hunting bow with an axle-to-axle measuring 33.5 inches in length. It is powered by the Helix Cams which give you the option of setting it up in either a Long Draw (27-30”) or Short Draw (24-27”) configuration.

It features the company’s Tri Loc System distinguished by: a Tri Loc Axle Cap which allows calibrated cam system clearance; a Tri Loc Roto Cup which allows set screws to lock into the riser, and; a Tri Loc Limb Pocket which bolts to the limbs to create a perfect lock.

The bow can be custom tuned using the RRAD Balanced Bow Technology and RRAD Weight Distribution System to give you the ability to distribute the weight throughout the riser to suit your personal preferences.

Tuning is very easy thanks to the RRAD system which helps to find the right balance with the bow. It is highly adjustable to suit the individual and is a solid shooter with an IBO rating of 333fps.

The bow is available with a blackout finish and this includes a Hard Coat Riser, Black Limbs and green accents. Riser finish options include Black, Hard Coat Grey, Hard Coat Green, Realtree Edge, Realtree Escape, Realtree Grey Edge, American Flag Grey and Realtree Polar.

The MSRP for this bow is $997.00

Maxx 37 Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

24 - 30"

50-70 lbs

33.5"

3.75 lbs

6.56"

65-85%

333 fps

Martin TM Hunter 33

The TM Hunter 33 is a lightweight, smooth drawing hunting bow that should suit a wide range of spot and stalk bow hunters.

The bow uses the RRAD Rev Cam System and is easily adjustable from 25 up to 70 lbs of draw weight.

As mentioned, this is a lightweight bow weighing only 3.6 and boasts a forgiving 7” brace height.

The bow features the new Tri Loc System including a Tri Loc Axle Cap for calibrated cam system clearance, a Tri Loc Roto Cup and the Tri Loc Limb Pocket for perfect alignment.

The bow is available as a right hand option only.

It has an MSRP of $797.00

TM Hunter Specs

Draw
Length

Draw
Weight

Axle-to-
Axle

Weight

Brace
Height

Let Off

Speed
(IBO)

18 - 30"

25-70 lbs

33"

3.6 lbs

7"

65-75%

333 fps

You can find more about the company including the other lines of bows in the range including the latest release crossbows, traditional hunting bows and extended range of bows for kids by visiting the Martin Archery website.

If you are interested in the Martin compound bows from the most recent previous years you can also visit our pages for the 2019 Martin bows.


0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *